Bơm dòng W

The W series from KRAL is primarily used when dirty or low-viscosity media are used. Robust polymer coating and continuous flow rates at differential pressures up to 120 bar – these features are combined in the KRAL W series screw pump.

Delivery rate: 15 to 290 l/min.
Max. differential pressure: 120 bar.
Viscosity: > 1 mm²/s.
Max. temperature: To 180 °C, magnetic coupling to 300 °C.
Installation: Wet or dry.
Spindle housing: Nodular cast iron EN-GJS-400, polymer-coated or other material options.
Screws: Steel, nitrided.

High-pressure pump for various media, easy to install.
The KRAL screw pump of the CK series is an extremely compact and cost-effective solution for high-pressure applications. It is also the best-selling screw pump line of the KRAL C series. Standardized pump / motor brackets made of aluminum are used for the CK pump – which is reflected in the favorable price and easy installation.

The screw pump of the CK series with its short shaft, radial shaft seal and internal bearings is a preferred solution in many applications.

In the KRAL screw pump of the W series, the screw material and the casing coating have been designed for improved sliding properties in such a way that low viscosity fluids can be pumped with high efficiency.

The running casing is coated with a resistant polymer that can absorb particles. The balancing cylinder of the screw pump has orifice insertions to reduce the leakage rate, therefore efficiency remains high.